Antrica User Guide

The Antrica is a multi-angle network capture device that can be used with Thunder Hockey. The Antrica is a good option for users who capture 3-4 video angles per game as it supports up to four SDI connections on a single device. 

Table of Contents

• Configuration and Set Up
• Network Capturing in Thunder

Configuration and Set Up

1. In "SDI Main" disable every protocol with the exception of RTSP:

2. For the "RTSP" protocol, make sure “RTSP TCP:” is set to TCP

3. The other "SDI Main" settings should be set to the below:

• “Set Stream Venc": H.264

• “Key Interval“: 15

• “Bitrate": 5500

• “Encoded Size": 1280x720

• “Encoding Frame Rate": 60

4. Click Apply to Save those settings.

5. In the "Extended" Settings section, select "Audio Setting" and ensure the following settings are set to the below:

• "Audio Codec": AAC

• “RTSP audio encode": AAC

6. Click Apply to Save those settings.

7. If all of the settings are configured correctly, the "Video parameters" section should reflect the below: 

8. Repeat the steps above for each camera angle.