GoPro Fusion Camera Configuration
The following setup should be completed prior to shipping a GoPro Camera bundle.
- Add the battery and two SD cards to GoPro and charge the camera for one hour
- Turn on the camera by holding down the Mode button on the left side
- Run through the initial setup on the camera
- Language: English
- GPS: On
- Voice Control: Off
- Connect the camera to the GoPro App (available on iOS)
- Follow setup instructions through the GoPro app
- If necessary, upgrade the Fusion Firmware to v1.60
- Set the XOS Default Video Format on the camera
- Tap the Mode button (on left side of camera) three times until you get to the Wrench
- Tap the red circle
- Video format setup should be available as the first choice, if not, tap the red circle to cycle through available options.The video format setup is displayed as a video camera
- Tap the Mode button to move down the Camera Setup options
- The XOS default settings:
- 5.2K 30
- ProTune: On
- ISO: 1600
- Exposure: 0
Comments
0 comments
Please sign in to leave a comment.